[. . . ] Keep the instruction manual and the Product information safe for future reference or for the next owner. 2Intended use This appliance is designed only to be built into kitchen units. Damage caused by incorrect connection is not covered under the warranty. 3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. [. . . ] To set it to the precise minute, press and hold the corresponding area in the setting ring for around 1-2 seconds. To exit the basic settings, use to go back to the main menu or switch off the appliance using . The mobile device and the appliance are within range of your home network's Wi-Fi signal. You can adjust the Home Connect settings and network settings in your appliance's basic settings. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network. You can connect your appliance to the Home Connect app via the Home Connect assistant. Note: If you are using the Home Connect assistant for the first time, only the "Start assistant" setting is available. You can use the Wi-Fi to switch off the network connection for your appliance. When you have connected successfully once, you can deactivate the Wi-Fi and not lose your detailed data. As soon as you activate Wi-Fi again, the appliance connects automatically. note: In networked standby mode , the appliance requires a maximum of 2 W. During monitoring, you can only view the operating status of the appliance in the app. For manual remote start, you must activate the remote start each time before you can start the appliance via the app. If you open the appliance door within 15 minutes of activating remote start or of the operation ending, remote start is deactivated. For permanent remote start, you can start and operate the appliance remotely at any time. If you often operate the appliance remotely, it is helpful to set the remote start to "Permanent". 3Operating the appliance with the Home Connect app You can use the Home Connect app to set and start the appliance remotely. Combustible objects that are left in the cooking compartment may catch fire. If smoke is emitted, the appliance must be switched Off or the plug must be pulled out and the door must be held closed in order to stifle any flames. In order to be able to set the appliance via the app, The manual or permanent remote start must be selected in the "Remote control status" basic setting. Notes ¡ If you open the appliance door within 15 minutes Of activating remote start or of the operation ending, the manual remote start is deactivated. When you start the oven using the controls on the appliance itself, the remote start function is activated automatically. [. . . ] To ventilate the appliances, the intermediate floor must have a ventilation cut-out. To ensure sufficient ventilation of the two appliances, there must be a ventilation opening of at Least 200 cm² in the base area. To ensure that the appliance door can be opened, you must take the minimum dimensions into consideration when installing in a corner. The dimension is dependent on the thickness of the unit front and the handle. [. . . ]